What Happens If MBR Is Damaged or Corrupted?

As we have mentioned in the above content, MBR is an essential part of booting the computer. Therefore, when it is damaged, your computer will fail to boot and you also will encounter different boot errors.

1. Bootmgr is missing.

When the MBR on your hard disk is missing corrupted, you may encounter the error bootmgr is missing.

2. Error loading operating system.

You may also encounter the issue error loading operating system when the MBR is damaged or corrupted.

3. Operating System not found.

Many computer users complain that they encounter the problem operating system not found when they boot their computer. So, this issue would occur when the MBR is damaged.

4. Invalid partition table.

The issue invalid partition table often occurs when you are booting your computer Windows 10/8/8.1/7.

5. Reboot and select proper boot device.

When you boot your computer, you may encounter the issue reboot and select proper boot device caused by corrupted or damaged MBR.

From the above information, you can find that there are many boot errors when the MBR is damaged or corrupted.

Thus, do you know how to fix these problems or do you know how to fix MBR Windows 10/8.1/8/7? If you don’t know, don’t worry. This post will show you the step-by-step guide for Windows fix MBR.

Fix MBR with Command Prompt

In this part, we will show you the first way to rebuild MBR. In this way, you need to input different command prompt. And aiming at Windows 10/8.1/8/7, we will show you how to fix MBR separately.

Fix MBR Windows 7

First of all, we will show you how to fix MBR Windows 7. You can refer to the step by step guide.

Step 1: Create Windows Installation CD/DVD

To fix MBR, you need the Windows Installation CD/DVD to boot your computer since your computer is unable to boot from the operating system. If you already have a Windows Installation CD/DVD, you can ignore this step and just go to Step 2.

  1. Click here to download the Windows media creation tool.
  2. Run this tool and move on according to the instructions to create the Windows Installation CD/DVD.
A Complete Guide to Windows 10 Media Creation Tool: How to Use

Don't know what Windows 10 Media Creation Tool is? Don't worry. This article will tell you what it is and how to use the tool to create installation media.

Read More

Step 2: Boot computer from installation media

  1. Connect the installation media to your computer and boot from it.
  2. Select the language.
  3. Click Next.
  4. Click Repair your computer.

click Repair your computer

Step 3: Open the Command Prompt window

  1. Select a keyboard input method and click Next.
  2. Input the password if you have.
  3. Choose Command Prompt.

choose Command Prompt to continue

Step 4: Input the following command

  • bootrec /fixmbr
  • bootrec /fixboot
  • bootrec /rebuildbcd

Please hit Enter after each command.

type the commands to fix MBR

When the Windows fix MBR process is finished, you can exit the command line window and reboot your computer to check whether it can boot normally.

However, if the command bootrec /rebuildbcd fails to work, you can use the following command to export and erase the BCD store and using the Rebuildbcd command again to fix MBR Windows 7. Please note you need to hit Enter to continue after each command.

  • bcdedit /export C:\bcdbackup
  • c:
  • cd boot
  • attrib bcd -s -h -r
  • ren c:\boot\bcd bcd.backup
  • bootrec /rebuildbcd

type the commands

Then you are required to press Y to confirm adding the installation to boot list and exit the command line window.

After this Windows fix MBR, you can reboot your computer to check whether it can boot normally.

Fix MBR Windows 8/8.1/10

Now, we will show you how to fix MBR Windows 8/8.1 and how to fix MBR Windows 10. As a matter of fact, to fix MBR Windows 8/8.1 and fix MBR Windows 10, the solutions are same. And here, we will show you how to fix MBR Windows 10 as an example.

We will show you how to fix MBR Windows 10 with the step-by-step guide.

Step 1: Boot the computer from the installation media

  1. Create the Installation CD/DVD. If you don’t know how to create the installation CD/DVD, you can refer to the Step 1 of fixing MBR Windows 7.
  2. Boot your computer from the installation media.

Step 2: Enter the Command Prompt window

  1. After booting the computer from the installation media, click Next based on the instructions.
  2. Click Repair your computer to continue.
  3. Click Troubleshoot > Advanced options > Command Prompt to continue.

enter Command Prompt window

Step 3: Input the following commands

  • bootrec /fixmbr
  • bootrec /fixboot
  • bootrec /scanos
  • bootrec /rebuildbcd

type the commands

Tip: Please remember to hit Enter after each command.

If the bootrec /rebuildbcd command fails to work, you can input the same command of fixing MBR Windows 7 to export and erase the BCD store and using the Rebuild BCD command again to perform Windows fix MBR.

When you have finished all steps, you can remove the installation media and change the BIOS order. Then reboot your computer to check whether your computer can boot normally.

Since the way to fix MBR Windows 8/8.1 is the same as the solution to fix MBR Windows 10, you can take the same way to perform master boot record repair if you are running Windows 8/8.1.

Fix MBR on EFI on Windows 10/8.1/8

At here, we will introduce another situation of Windows fix MBR. Do you know how to fix MBR if the disk is GPT?

Don’t worry. We will show you how to repair MBR Windows 10/8.1/8 with step by step guide.

Step 1: Enter the Command Prompt window

  1. Boot the computer from the installation media.
  2. Click Repair your computer.
  3. Click Troubleshoot > Advanced options > Command Prompt to continue.

Step 2: Type the following commands

  • diskpart
  • select disk 0
  • list vol

Step 3: Check the EFI partition and assign a drive letter

  • sel vol * (* represents the number of volume)
  • assign letter =x: (x represents the drive letter)
  • exit
Note: The EFI partition must be formatted to FAT32.

Step 4: Repair MBR Windows 10/8.1/8 by inputting the following command

  • cd /d x:\EFI\Microsoft\Boot\ (x represents the drive letter)
  • bootrec /fixboot
  • ren BCD BCD. backup
  • bcdboot c:\Windows /l en-us /s x: /f ALL

If the drive letter where your operating system is installed is different, you need to replace the letter c with a different drive letter.

When you have finished all steps, you can remove your installation media and exit the command prompt window. Then reboot your computer to check whether your computer can boot normally.

However, if you don’t have the Windows installation CD/DVD, how can you fix MBR?

And in the following part, we will show you how to fix MBR Windows 10 without CD.

Fix MBR Windows 10 Without CD

In this part, we will show you how to fix master boot record if you don’t have the Windows installation CD/DVD.

To fix MBR Windows 10 without CD, you need the help of an MBR repair tool. Thus, the MBR repair software – MiniTool Partition Wizard is strongly recommended.

MiniTool Partition Wizard can help you to fix MBR with ease on Windows 7/8/8.1/10, just requiring a few clicks.

MiniTool Partition Wizard is designed to optimize partition and disk use with its powerful features. It can completely control your partition and disk with its various features, such as migrating OS to SSD, cloning hard drive, convert MBR to GPT, and so on.

Related article: 2 Reliable and Powerful MiniTool SSD Cloning Software (No Data Loss)

Thus, you can get MiniTool Partition Wizard Pro immediately and we will show you how to fix MBR Windows 10/8.1/8/7 without Windows Installation CD/DVD.